Question 1

Is UL 94 V-0 the same as UL 1441 VW-1?

Accepted Answer

No. UL 94 V-0 is a material or component flammability classification under specified specimen conditions. UL 1441 VW-1 is an optional vertical flame test for applicable coated electrical sleeving. The two results use different test structures and should not be treated as interchangeable.

Question 2

What does IEC 60684-2:2025 define?

Accepted Answer

IEC 60684-2:2025 defines test methods for flexible insulating sleeving. The applicable pass limits must be confirmed from IEC 60684-1, the relevant IEC 60684-3 product sheet, customer specifications and the actual construction.

Question 3

What is the UZFT2 category used for?

Accepted Answer

UZFT2 is a UL Product iQ category for coated electrical sleeving. It is a classification boundary, not a blanket certification for every sleeving product. The exact model, UL file, marking and end-product conditions must be checked.

Question 4

What is the role of UL 1446 in sleeving projects?

Accepted Answer

UL 1446 concerns electrical insulation systems and their thermal evaluation. It is different from a sleeving product rating and cannot by itself prove that a particular sleeving model is approved for every motor, transformer or appliance design.

Question 5

What evidence should an OEM request with a sleeving sample?

Accepted Answer

Request the exact model and revision, dimensional and material data, applicable UL or IEC references, test reports, marking or file information where applicable, lot traceability, installation conditions and customer-specific validation plan. A sleeving test report is not the same as complete system approval.

Productfamilie	Goed startpunt	Typische toepassing	Voor goedkeuring controleren
Siliconen glasvezelkous	Hoge temperatuur en elektrische isolatie	Motor- en transformatorleidingen en warme kabelbomen	Temperatuur, spanning, binnendiameter en slijtage
Krimpslang	Krimpbekleding en afdichting	Klemmen, aftakkingen, kabeluitgangen en vochtbescherming	Krimpverhouding, eindmaat, lijm en vlamvereiste
PTFE- en siliconenslang	Vloeistofrouting of flexibele isolatie	Sensoren, vloeistofleidingen, apparaten en compacte apparatuur	Vloeistof, druk, temperatuur, buigradius en maat
PET-, geribbelde en zelfwikkelende kous	Kabelboomrouting en slijtagebescherming	Automotive, kasten, bewegende delen en reparatie	Bundeldiameter, beweging, slijtage en montage

Gebouwd voor technische validatie en leveranciersgoedkeuring.

Bepaal eerst het beschermingsprobleem en kies daarna het materiaal

Gebouwd voor technische validatie en leveranciersgoedkeuring.

Van toepassingsbeoordeling naar stabiele serieproductie.

Toepassing beoordelen

Monster valideren

Leverancier goedkeuren